Brunswick Medalist Snooker Table

Circa 1930 Brunswick Medalist Snooker Table - $9,500
*Delivered and Installed (see delivery and installation fees)



This is a beautiful 1930's Brunswick Medalist 9' Snooker Table. This table is in great condition; there are no missing marquetry and the finish is original.  This table was well cared for during it's life.  The pockets do need to be restored, but that will be included in the price of the table.

Professional delivery and installation is included.
Also included, New Simonis 760 or 860 (your choice of color).


Here is some background from the Brunswick website on the Medalist table:

Medalist
Technical Information: The information below is from page 16 of the 1928 Brunswick Billiard and Bowling Catalog, Brunswick-Balke-Collender Company.

Also available in a "combination" style.

Construction: Built with heavy 5-ply compound sides on which is superimposed top molding of 6 x 3 3/8" specially selected and scientifically kiln-dried lumber, tongued, grooved, and glued. Legs and double strength glued and veneered stock.

Rigidity is secured by fastening the solidly constructed sides into the leg with maple dowels and bolts of heavy metal and still further rigidity is assured by means of cross stretchers extending from side to side and end to end of table.

The wood surface of The Medalist is handsomely figured Butt Walnut with fancy inlay, and hand rubbed to a dull finish.

Slate Bed: Consists of three pieces of the best quality slate of regulation 1" thickness, with all joints secured by brass dowels and sockets. Playing surface is entirely free from screw holes. If desired, slate bed of 1 1/2" thickness can be furnished

Cushion Rails: The cushion rails of The Medalist table are made up of a 3-ply body consisting of three layers of woods of alternating grain glued together to insure the rails against climatic changes. The center layer of these plies is hard maple. The center layer of these plies is hard maple. This is the layer through which the cushion bolts are placed, and maple is used because it holds the bolts firmly in place.

Rails: The tops of the rails are covered with a rail cap of compound construction faced with solid Rosewood. The rails are securely fastened to the table with invisible cushion bolts. These bolts are covered with blind cushion rail facing built up of 5-ply compound construction faced with specially selected high grade Butt Walnut veneer with fancy inlay.

Cushions: The Medalist table can be equipped with any style Monarch perfect angle cushion.

Pocket Irons: The pocket irons are No. 6 style, countersunk in the ends of the cushion rails by means of brass sockets.